All prices quoted are non-binding recommended prices. 7/96 Design: Drill made from one piece, with embedded teeth made from particularly resistant carbide for up to six times longer service life. For small drill diameters (up to ∅ 14 mm), the head consists of a one-piece carbide piece with four cutting edges. This prevents snagging on the reinforcement. The shank has an SDSplus attachment for particularly fast changeover between armouring drill and hammer drill. Application: Ideal for reinforced concrete with the usual building site armouring. If a hammer drill hits a reinforcement, it is exchanged for the armouring drill, which is then used to drill through the reinforcement and then the hammer drill is clamped again. Note: Only cut through armouring with authorisation from a structural engineer! ∅ mm Drilling depth mm Total length mm 1280 Order No. € 12 250 300 22.00 …0120 14 250 300 27.40 …0140 16 250 300 55.00 …0160 18 250 300 65.90 …0180 20 250 300 71.40 …0200 22 250 300 76.90 …0220 25 250 300 82.40 …0250 28 250 300 98.90 …0280 30 250 300 110.00 …0300 32 250 300 121.00 …0320 35 250 300 132.00 …0350 (W119) Armouring drill RebarBreaker up to ∅ 14 mm from ∅ 16 mm Design: High drill bit with sturdy base and ground carbide teeth on all sides, which can be sharpened. The clamping area is large and therefore ensures quick drill dust removal without sticking. Drilling residues are also easy to remove. Max. drilling depth 65 mm. Application: Ideal for installation of sockets and junction boxes. Suitable for a number of materials such as aluminium, insulation, gas concrete, plasterboard, wood and sandstone. ∅ mm Area of application 1275 Order No. € 68 Switch boxes 44.50 …0680 82 Junction boxes 57.30 …0820 (W121) Multi-purpose keyhole saw Allmat Mount shank 1275 Order No. € Hexagonal 13.95 …0050 SDS-plus 13.95 …0055 (W121) Mount shank for Allmat multi-purpose keyhole saw ∅ mm Length mm 1275 Order No. € 10 100 6.30 …0010 (W121) Centre drill for mount shank Allmat Drill bits 7
RkJQdWJsaXNoZXIy NTg4MTI=