FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 7/93 Design: Certified by the Prüfgemeinschaft Mauerbohrer (PGM) according to the requirements of the Deutsches Institut für Bautechnik (DIBt). Note: For long drills, use a drill with the same diameter to pre-drill at least 150 mm deep. ∅ mm Spiral length mm Total length mm 1281 1279 7620 1270 Order No. € € € € 8 200 340 53.50 – – – …0834 10 200 340 57.50 – – – …1034 12 200 340 60.20 – 59.80 – …1234 12 400 540 66.40 – 70.40 – …1254 14 200 340 65.00 – – – …1434 14 400 540 77.10 – 77.40 – …1454 16 200 340 66.80 – – – …1634 16 400 540 78.80 – 83.60 – …1654 18 200 340 67.70 – 75.40 79.50 …1834 18 400 540 79.40 – 88.60 97.50 …1854 18 600 740 – – – 116.50 …1874 18 800 940 98.50 – 128.50 121.00 …1894 20 200 320 70.30 – 79.90 84.20 …2032 20 400 520 84.90 – 94.00 101.50 …2052 20 600 720 – – – 118.50 …2072 20 800 920 102.50 – – 125.50 …2092 20 1200 1320 193.50 – – – …2099 22 200 320 74.90 – – – …2232 22 400 520 87.50 – 99.60 104.50 …2252 22 800 920 117.50 – – 125.00 …2292 22 1200 1320 213.00 – – – …2299 24 200 320 76.30 – 89.70 – …2432 24 400 520 88.50 – – 106.00 …2452 25 200 320 78.80 – 92.40 94.30 …2532 25 400 520 89.60 – 108.50 107.50 …2552 25 600 720 – – – 135.50 …2572 25 800 920 127.00 – 157.50 152.50 …2592 25 1200 1320 219.50 – – 263.00 …2599 26 400 520 – – – 121.00 …2652 28 250 370 90.60 – – – …2837 28 400 520 – – 118.50 – …2852 28 400 520 – – – 121.50 …2857 28 450 570 101.50 – – – …2857 28 550 670 119.00 – – – …2867 28 600 720 – – – 142.50 …2867 28 800 920 – – – 165.50 …2892 30 250 370 93.10 – – – …3037 30 400 520 – – 126.00 – …3052 30 400 520 – – – 123.00 …3057 30 450 570 102.50 – – – …3057 30 600 720 – – – 149.50 …3072 ​ (W120) (W265) (W265) (W119) SDS-max hammer drill Continued on next page 1281 4 cuttings edges. High drilling speed thanks to optimised head geometry. Precise drilling thanks to special blade design. The wide twist shape ensures good drilling progress. HAST annealed surface for higher break-resistance in hammer drilling operation. For concrete, stone and brickwork. 1279 2 cuttings edges. With inclined side cutting pliers for fast drilling results. Vibration optimised spiral design for best power transmission and increased speed. For reinforced concrete, brickwork, natural stone, sand-lime brick, ceramic tile, marble, brick. 7620 4 cutting edges. Welded solid carbide head, extremely heat-resistant, strong and durable connection with the steel body. Outstanding service life even under the toughest conditions. For reinforced concrete, brickwork, natural stone, sand-lime brick, ceramic tile, marble, brick. 1270 Y-cutting profile for very good material removal and high drilling speed. The HAST-hardened surface increases the breaking strength, even with reinforcement hits. Optimised impact throughput due to computercalculated Twinmax twist. The faster work progress relieves the strain on joints and muscles. For concrete, stone, brickwork, marble, brick. 1270 DURA TEC 7620 Welded on solid carbide metal head. 1281 1279 Hammer drills 7

RkJQdWJsaXNoZXIy NTg4MTI=