All prices quoted are non-binding recommended prices. 7/76 Outer ∅ mm Cutting width mm Hole ∅ mm Number of teeth Tooth type Pin holes 7652 Order No. € 165 1.8 20 54 TF negative (trapeze flat tooth) – 70.60 …0140 160 2.2 20 4 TF (trapeze flat tooth) 2/6/32.5 73.20 …0010 190 2.2 20 4 TF (trapeze flat tooth) 2/6/32.5 88.30 …0020 250 2.4 30 6 TF (trapeze flat tooth) 2/7/42 + 2/9/46.4 + 2/10/60 137.50 …0030 300 2.4 30 8 TF (trapeze flat tooth) 2/7/42 + 2/9/46.4 + 2/10/60 166.50 …0040 136 1.5 20 24 WZ (alternating tooth) – 37.00 …0050 165 1.5 20 24 WZ (alternating tooth) – 43.90 …0060 165 1.5 20 36 WZ (alternating tooth) – 46.40 …0070 165 1.5 20 48 WZ (alternating tooth) – 52.40 …0080 190 1.5 30 24 WZ (alternating tooth) – 44.00 …0090 165 1.8 20 48 WZ (alternating tooth) – 70.20 …0100 216 2.1 30 66 WZ (alternating tooth) – 83.40 …0110 160 1.8 20 4 TF (trapeze flat tooth) – 71.10 …0120 165 1.8 20 4 TF (trapeze flat tooth) – 75.70 …0130 (W257) HW circular saw blade 7652 0010 – 0040 For rough cuts in fibre cement boards. 7652 0050 – 0090 Optimised for use with cordless machines. For rough, narrow cuts in all types of wood and wood-based materials. 7652 0100 + 0110 Optimised for use with cordless machines. For very fine, narrow cuts in rough, veneered or laminated chipboard, acoustic panels and panels coated on one or both sides. 7652 0120 + 0130 Optimised for use with cordless machines. For rough cuts in fibre cement boards. 7652 0140 Optimised for use with cordless machines. For very fine, narrow cuts in aluminium and ME metals, plastics, epoxy resin and wood. Outer ∅ mm Cutting width mm Hole ∅ mm Number of teeth Tooth type Pin holes 7650 Order No. € 160 2.4 20 20 W (Alternating tooth) 2/6/32 33.60 …0010 190 2.6 30 30 W (Alternating tooth) 2/7/42 39.60 …0020 230 2.6 30 34 W (Alternating tooth) 2/7/42 43.90 …0030 160 2.8 20 36 W (Alternating tooth) 2/6/32 39.50 …0040 160 2.8 20 48 W (Alternating tooth) 2/6/32 47.90 …0050 190 2.8 30 42 W (Alternating tooth) 2/7/42 47.10 …0060 190 2.8 30 56 W (Alternating tooth) 2/7/42 55.50 …0070 210 3.0 30 42 W (Alternating tooth) 2/7/42 47.90 …0080 250 3.2 30 42 UW (Universal alternating tooth) 2/7/42 + 2/10/60 58.60 …0090 300 3.2 30 48 UW (Universal alternating tooth) 2/7/42 + 2/10/60 65.20 …0100 250 3.2 30 60 KW (Plastic alternating tooth) 2/7/42 + 2/10/60 71.40 …0110 300 3.2 30 28 LWZ (Longitudinal cutting alternating tooth) 2/7/42 + 2/10/60 51.90 …0120 315 3.2 30 28 LWZ (Longitudinal cutting alternating tooth) 2/7/42 + 2/10/60 52.70 …0130 350 3.5 30 32 LWZ (Longitudinal cutting alternating tooth) 2/7/42 + 2/10/60 60.70 …0140 400 3.5 30 36 LWZ (Longitudinal cutting alternating tooth) 2/7/42 + 2/10/60 65.30 …0150 450 3.8 30 40 LWZ (Longitudinal cutting alternating tooth) 2/7/42 + 2/10/60 88.80 …0160 315 3.2 30 20 FF (Flat tooth with bevel) 2/7/42 + 2/10/60 52.40 …0170 400 3.8 30 28 FF (Flat tooth with bevel) 2/7/42 + 2/10/60 62.70 …0180 450 4.0 30 32 FF (Flat tooth with bevel) 2/7/42 + 2/10/60 87.90 …0190 (W772) HW circular saw blade 7650 0010 – 0030 For fast, clean cuts in natural woods and glued woods. 7650 0040 – 0080 For high demands on the cutting quality of single-sided coated and veneered boards, hardboard, chipboard, blockboard, plywood, natural woods, hard paper, hard fabric, hard foam, hard rubber, plasterboard and plastic pallets. 7650 0090 + 0100 For simple, fast cuts in panel materials, veneered or covered with plastic on one side. 7650 0110 For simple, fast cuts in panel materials, veneered and plastic-covered on both sides as well as surface-finished materials with high demands on the cutting quality. 7650 0120 – 0160 For longitudinal and cross cuts in all natural woods, wood panel materials, also veneered on one side or covered with plastic on one side. 7650 0170 – 0190 Nail-resistant For formwork timbers, boards, round and square timbers with concrete fittings and nail residues. Highest safety due to low tooth protrusion. Circular saw blades 7
RkJQdWJsaXNoZXIy NTg4MTI=