Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 7/63 Design: Sturdy construction with axial and radial ground special grinding for optimum cutting results. Replaceable centring drill bit for smooth tapping without punch-marking. Application: Can be used on portable, magnetic and pillar drilling machines. With pillar drilling machines always choose manual feed. Saw ∅ mm PG/metric 2715 2722 2728 Order No. Flat cut MBS Deep cut € € € 16 M16 31.90 – – …0160 17 – 31.90 – – …0170 18 – 31.90 54.70 – …0180 19 – – 54.70 – …0190 20 M20 33.00 54.70 53.00 …0200 21 – 33.00 54.70 51.90 …0210 22 – 33.00 54.70 51.90 …0220 23 – 34.00 54.70 51.90 …0230 24 – 34.50 54.70 51.90 …0240 25 M25 34.50 54.70 51.90 …0250 26 – 36.10 62.00 68.50 …0260 27 – 36.10 62.00 – …0270 28 – 39.40 62.00 68.50 …0280 29 – 39.40 63.80 – …0290 30 – 39.40 63.80 68.50 …0300 31 – 47.80 72.10 – …0310 32 M32 47.80 72.10 79.10 …0320 33 – 48.40 72.10 – …0330 34 – 48.40 72.10 79.10 …0340 35 – 48.40 76.60 79.10 …0350 36 – 48.90 76.60 – …0360 37 PG 29 52.10 79.00 87.60 …0370 38 – 52.10 79.00 – …0380 39 – 52.10 79.00 87.60 …0390 40 M40 52.10 79.00 87.60 …0400 41 – 52.00 83.80 – …0410 42 – 54.10 83.80 101.00 …0420 43 – 54.40 83.80 – …0430 44 – 54.40 83.80 – …0440 45 – 54.40 83.80 101.00 …0450 46 – 57.90 87.20 114.00 …0460 47 PG 36 59.60 89.70 114.00 …0470 48 – 59.60 89.70 – …0480 49 – 59.60 93.90 – …0490 (W246) (W246) (W246) Saw ∅ mm PG/metric 2715 2722 2728 Order No. Flat cut MBS Deep cut € € € 50 M50 62.70 93.90 114.00 …0500 51 – 62.70 93.90 – …0510 52 – 64.60 96.50 – …0520 53 – 65.10 99.00 – …0530 54 PG 42 65.80 99.00 – …0540 55 – 65.80 99.00 128.50 …0550 56 – 70.70 109.00 – …0560 57 – 72.20 109.00 – …0570 58 – 72.20 109.00 – …0580 59 – 72.90 112.00 – …0590 60 PG 48 72.90 121.50 173.50 …0600 61 – – 125.50 – …0610 62 – – 125.50 – …0620 63 M63 – 125.50 – …0630 64 – – 136.00 – …0640 65 – 78.90 136.00 – …0650 66 – – 136.00 – …0660 67 – – 136.00 – …0670 68 – 82.80 136.00 – …0680 69 – – 144.00 – …0690 70 – 82.80 144.00 – …0700 71 – – 159.50 – …0710 72 – – 159.50 – …0720 73 – – 159.50 – …0730 74 – – 169.00 – …0740 75 – 103.50 169.00 – …0750 76 – – 169.00 – …0760 77 – – 169.00 – …0770 78 – – 169.00 – …0780 79 – – 176.00 – …0790 80 – 110.00 176.00 – …0800 81 – – 178.00 – …0810 82 – – 178.00 – …0820 83 – – 178.00 – …0830 (W246) (W246) (W246) Carbide tipped keyhole saw 2715 Flat cut. With ejection spring to remove the core and protect the carbide teeth when drilling. For material thicknesses up to 4 mm, stainless steel up to 2 mm. ∅ 16–30 mm made of one piece. From ∅ 31 mm with specially hardened adapter for absorbing torsional forces. For more stability, the MT adapter should be used from ∅ 31 mm upwards. High concentricity. High cutting performance and tool life thanks to CAD-optimised rake angles. For flat material. 2722 MBS. With ejection spring to remove the core and protect the carbide teeth when drilling. For material thickness up to max. 10 mm. (With material thickness over 6 mm, the tool needs to be set down for chips to be emptied several times.) From ∅ 37 mm with specially hardened adapter for absorbing torsional forces. For more stability, the MT adapter should be used from ∅ 37 mm upwards. Improved cutting behaviour, high cutting performance and service life due to advanced cutting geometry. For flat material, but also suitable on raw material and concaved surfaces. 2728 Deep cut. For material thicknesses up to 4 mm, stainless steel up to 2 mm. Especially for pipe material and curved surfaces. 2728 Cup height: 35 mm (∅ 20-55 mm) 60 mm (∅ 60 mm) Shank: 10 mm (∅ 20–50 mm) 13 mm (∅ 51-60 mm) 2722 Cup height: 22 mm Shank: 10 mm (∅ 18–36 mm) 13 mm (∅ 37-100 mm) 2715 Cup height: 12 mm Shank: 10 mm (∅ 16–50 mm) 13 mm (∅ 51-120 mm) Continued on next page Keyhole saws 7
RkJQdWJsaXNoZXIy NTg4MTI=