Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 7/49 Design: Robust bending device with closed, maintenance-free hydraulic system, single-handed use possible. Scope of delivery: Bending drive, bending segments, 1 cross bar with sliders and sheet steel case. For pipe ∅ mm 7249 Order No. € 12; 15; 18; 22 569.00 …1220 15; 18; 22 628.50 …1522 16; 18; 20; 25/26; 32 634.00 …1632 (W001) Single-hand pipe bender with hydraulic feed 7249 1220 + 1632 Polyamide bending segments (aluminium at ∅ 22 mm). For simple, fast and dimensionally accurate bending up to 90° of e.g. soft copper pipes (also thin-walled and jacketed), jacketed C-steel pipes of the press-fitting systems, soft precision steel pipes and composite pipes. 7249 1522 m Aluminium bending segments. For simple, fast and dimensionally accurate bending up to 90° of stainless steel pipes containing nickel of the press-fitting systems EN 10217-7, EN 10312, series 2, material 1.4401. INOX Design: With two double-sided bending tools: one sharp-edged with a radius of 4 mm and one with radii of 15 and 25 mm. Angle and length stop can be continuously adjusted. With bending lever extension and suitable for mounting on a workbench. Application: For bending flat, rectangular, round and angled material made of steel, copper and aluminium up to 90°. Max. bending rate: cold mm warm mm Flat steel EN 10058 (DIN 1017) 100 x 10 100 x 20 80 x 12 80 x 25 50 x 15 – Rectangular steel EN 10059 (DIN 1014) 22 30 Round steel EN 10060 (DIN 1013) 25 30 Angle steel EN 10056-1 (DIN 1028) 100 x 10 100 x 12 Max. bending capacity related to the dimension of the materials ST 37 up to material strength 370 N/mm2. Note: Special bending tool as accessory on request. Working height mm 7234 Order No. € 100 1496.00 B …0001 (W522) Eccentric angular bender Design: Robust bending device with hydraulic feed. Bending angle display reduces start, stop and release of pump for measurements. To mount subframe Order No. 7241. Application: For bending gas and water pipes. Note: For reducing rings see Order No. 7241. For pipe ∅ Inch 7239 7237 Order No. € € 3/8; 1/2; 3/4; 1; 1.1/4 1777.00 B 1382.00 B …1005 3/8; 1/2; 3/4; 1; 1.1/4; 1.1/2; 2 2325.00 B 1585.00 B …1010 (W624) (W624) Pipe bender, hydraulic 7239 Open wing head. 7237 Expandable wing head. 7237 7239 Design: For gas and water pipes (DIN 2440, EN 10255, ASTM A53). Bending segment Inch Bending radius mm 7241 Order No. € 3/8 45 27.10 …1038 1/2 50 31.20 …1012 3/4 65 39.80 …1034 1 100 46.80 …1100 (W624) Bending segment Inch Bending radius mm 7241 Order No. € 1.1/4 130 54.80 …1114 1.1/2 150 103.50 …1112 2 200 157.00 …1200 (W624) Bending segment Design 7241 Order No. € Swivelling 338.50 …9000 (W624) Base for pipe bending tool Benders 7
RkJQdWJsaXNoZXIy NTg4MTI=