FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 7/43 Pipe cutter for steel pipes up to 2" For pipe ∅ 7206 7206 Order No. € € 1/8–2" (10-60 mm) 93.80 – …0005 Spare cutting wheel – 6.55 …0010 ​ (W574) (W574) Design: Steel-forged body with guide blocks made of zinc die casting, cutting wheel made of high-alloy, hardened steel, interchangeable without the use of tools. 2 wide guide rollers for secure guidance of the cutting wheel on the pipe. With spring pressure system for improved cutting and higher service life of cutting wheel. Pressure regulated via smooth-running spindles. T-handle for highest power transmission. Application: For clean and right-angled cutting of steel pipes. After cutting, the thread can be cut directly. Design: Body made of forged steel, cutting wheel made of robust special steel, protection by limiting infeed before contact to guide rolls. 2 hardened guide rolls. Pressure is regulated by the broad and ergonomic handle via the stable, long spindle. Application: For clean cutting of steel pipes with a wall thickness of up to 12.5 mm. For pipe ∅ 7201 7201 Order No. € € 1/8–2" (10-60 mm) 175.00 – …0070 Spare cutting wheel (10–60 mm, S 8 mm) – 15.80 …0080 1.1/4–4" (30–115 mm) 346.50 – …0190 Spare cutting wheel (30–115 mm, S 12 mm) – 36.40 …0200 ​ (W001) (W622) Pipe cutter Corso St 7201 0070 * With 4 hardened guide rolls. Pipe cutter Corso P For pipe ∅ 7214 7214 Order No. € € 1/2–2" (10–63 mm)* 135.50 – …0020 Spare cutting wheel (10–63 mm, S 7 mm) – 19.95 …1010 2–4" (50–110 mm) 189.50 – …0030 4–6" (110–160 mm) 238.50 – …0040 Spare cutting wheel (50–315 mm, S 11 mm) – 24.20 …1020 Spare cutting wheel (50–315 mm, S 16 mm) – 28.80 …1030 Spare cutting wheel (50–315 mm, S 19 mm) – 46.50 …1040 ​ (W001) (W622) Design: Spare cutting wheel made of robust special steel. 2 hardened guide rolls. Pressure regulated via stable, length-guided spindle with quick-adjustment. Application: For clean cutting of plastic and composite pipes with a wall thickness of up to 19 mm. ​ ​ 7214 0020 ​ ​ Tube and pipe shears For pipe ∅ mm 7138 722A Order No. € € 0–22 27.40 – …0022 Spare blade for 0–22 mm 13.10 – …1022 0–28 39.60 – …0028 Spare blade for 0-28 mm 14.75 – …1028 0–25 – 42.90 …0185 Spare blade for 0–25 mm – 14.60 …1185 (W574) (W525) Design: Blade with pointed cutting edge for low-effort penetration into the material. With opening spring and one-hand locking lever. Application: For precise, single-handed cutting of tubes, including with textile reinforcement e.g. aramid fibres 7138 0022 Die-cast magnesium body, blade PTFE coated. ​ 7138 0028 Die-cast magnesium body, blade PTFE coated. The joint is made of a steel mounted axle with needle bearing. Handles with impact-absorbing soft inserts. Also cuts soft plastic pipes e.g. PEX, PE, PB, etc. as well as thin-walled plastic armoured pipes. ​ 722A 0185 Body made of glass fibre reinforced plastic, blade made of special tool steel, oil-hardened. Additionally cuts thin-walled plastic tubes (e.g. plastic armoured tubes) and hoses, also fabricreinforced, made of plastic and rubber. ​ 7138 0022 7138 0028 722A Pipe cutters 7

RkJQdWJsaXNoZXIy NTg4MTI=