FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/126 ​ Procedure RT 100 T: • Mill a surface at right angle to the start angle of hole machining. • P roduce a cylindrical pilot hole (tolerance F9) with a drilling depth of at least 1 x D. • Insert into the pilot hole with approx. 300 rpm at f = 500 mm/min. • Set the cooling lubricant pressure and speed. • Continual drilling to full drilling depth without relief cycle. • When drilling through holes with oblique exit, reduce the feeding rate vf to 40% approx. 1 mm before breaking through. • A fter reaching the drilling depth, switch off the rotation and coolant, extract in rapid traverse. • Conventional coolant lubrication min. 40 bar. Note: The drills can be sharpened several times. All deep holes must be piloted before starting to drill. Deep hole drills should never be moved freely in the machine when at the full speed. Continued Spiral drill, SuperLine, 12 x D Design: Special groove shape with double bevel and special grinding. With twisted internal cooling through the bar. Angle of rake 30°. The drill has a very good self-centring behaviour. Application: For drill holes with very narrow ∅ tolerances and very good surfaces. Suitable for drilling extremely deep holes up to 20 x D with high cutting speeds. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 110 88 70 100 70 – 100 80 – – – 120 – 50 – – 1234 ∅ m7/h7 mm Spiral length l2 mm Shank length l3 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1400 N/mm2 f mm/rev 1234 Order No. € 3 70 36 100 6 0.1 C◊ …0300 3.5 96 36 136 6 0.125 C◊ …0350 4 96 36 136 6 0.125 C◊ …0400 4.5 118 36 158 6 0.125 C◊ …0450 5 118 36 158 6 0.125 C◊ …0500 5.5 140 36 180 6 0.16 C◊ …0550 6 140 36 180 6 0.16 C◊ …0600 6.5 162 36 202 8 0.2 C◊ …0650 7 162 36 202 8 0.2 C◊ …0700 7.5 183 36 223 8 0.2 C◊ …0750 8 183 36 223 8 0.2 C◊ …0800 8.5 205 40 249 10 0.25 C◊ …0850 9 205 40 249 10 0.25 C◊ …0900 10 227 40 271 10 0.25 C◊ …1000 12 274 45 323 12 0.25 C◊ …1200 14 318 45 367 14 0.315 C◊ …1400 ​ (W114) TiAlN Deep hole drill, 20 x D Solid carbide RT 100 T DIN 6535-HA 135° 20xD TiAlN ​ ​ 3 Solid carbide drills 1.2

RkJQdWJsaXNoZXIy NTg4MTI=