FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 7/11 Steel C Cast C Brush ∅ mm Effective working width mm Working length mm Wire thickness mm max. rpm min-1 7022 7976 Order No. € € 7022 7976 7022 7976 7022 7976 100 13 12 22 20 0.5 12500 15000 9.05 13.60 …0100 115 15 12 20 24 0.5 12500 15000 14.10 19.25 …0115 ​ (W566) (W872) Steel wire 7976 7022 Design: Very robust, nylon filaments impregnated with silicon carbide with hard and pointed tips and very flexible working surface. High elasticity with no risk of breakage. This prevents clogging the trim with grinding residue to ensure constant high quality grinding. Plus the abrasive filaments are resistant against weak acids and lyes. With thread M14 x 2. Application: For mounting in all commercially available single-hand angle grinders, specially developed for mounting on cordless angle grinders. For minor to moderate cleaning, for working with large surfaces and for hard to reach places. For structuring and satin finishing as well as for removing varnish and deburring. Steel C INOX C Cast C Aluminium C Wood C Brush ∅ mm Effective working width mm Working length mm max. rpm min-1 8807 Order No. € 100 10 20 12500 20.80 …0100 ​ (W702) Steel C Cast C Wood C Brush ∅ mm Effective working width mm Working length mm Wire thickness mm max. rpm min-1 7025 Order No. € 100 10 20 0.30 12500 11.00 …0101 ​ (W566) Steel wire Conical brush, silicon carbide INOX C Aluminium C Non-ferrous metal C Brush ∅ mm Effective working width mm Working length mm Wire thickness mm max. rpm min-1 7025 Order No. € 100 20 20 0.20 12500 22.30 …1100 ​ (W566) Stainless steel wire Design: With thread M14 x 2. Application: For use in all commercially available one-hand angle grinders. For minor to moderate cleaning, for working with large surfaces and for hard to reach places. For roughening and matting and for the removal of paint, varnish, burrs, rust, scale, etc. INOX C Aluminium C Non-ferrous metal C Brush ∅ mm Effective working width mm Working length mm Wire thickness mm max. rpm min-1 7022 7977 Order No. € € 7022 7977 7022 7977 7022 7977 100 – 12 – 20 0.5 – 15000 – 21.30 …1100 115 15 12 20 24 0.5 12500 15000 20.40 28.80 …1115 115 15 – 20 – 0.35 12500 – 24.70 – …1116 ​ (W566) (W872) Stainless steel wire 7977 7022 Bevel brush, wavy set Design: With thread M14 x 2. Application: For use in all commercially available one-hand angle grinders. For aggressive use during heavy-duty cleaning tasks and when working on large surfaces. For the removal of paint, burrs, cinder, rust, scale, etc. Bevel brush, knotted ​ Conical brushes 7

RkJQdWJsaXNoZXIy NTg4MTI=