FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 7/9 Design: Very robust, nylon filaments impregnated with silicon carbide with hard and pointed tips and very flexible working surface. High elasticity with no risk of breakage. This prevents clogging the trim with grinding residue to ensure constant high quality grinding. Plus the abrasive filaments are resistant against weak acids and lyes. Application: For use in stationary machines. For deburring precision parts as well as pipe and profile sections with a consistent grinding effect. Ideal for contour-rich components and for defined edge rounding. Brush ∅ mm Grit Effective working width mm Working length mm Hole ∅ mm max. rpm min-1 7055 Order No. € 150 120 18 32 13 8000 31.80 …0150 178 120 20 45 13 8000 40.00 …0178 200 120 18 35 19 6000 44.90 …0200 ​ (W702) Wheel brush, silicon carbide Design: Plastic brush with interspersed aluminium oxide abrasive grain. Mould-cast for long life and consistent material removal. No clogging, minimal contact pressure. Application: To clean heavily clogged filaments and for deburring and preparing surfaces. Ideal for use on bench grinders. Delivery includes nylon flange for inner diameter 12.7; 15.9; 19; 22.2 mm. ∅ x thickness mm Grit Colour max. rpm min-1 7947 7955 Order No. Type TA Type TC € € 150 x 12.7 36 brown 6000 85.20 – …0036 150 x 12.7 50 green 6000 85.20 85.20 …0050 150 x 12.7 80 yellow 6000 85.20 85.20 …0080 150 x 12.7 120 grey 6000 – 85.20 …0120 150 x 12.7 220 red-brown 6000 – 85.20 …0220 ​ (W879) (W879) Radial grinding brush Sunburst m 7947 Type TA angled Thicker, stiffer bristles achieve a higher removal rate. 7955 Type TC curved Thinner, more flexible bristles mean greater adaptability, giving a consistent finish, even on profiled surfaces. Design: Plastic brush with interspersed aluminium oxide abrasive grain. Mould-cast for long life and consistent material removal. No clogging, minimal contact pressure. With M14 connection thread and reinforced back for use on angle grinders without extra backing pads. Application: For quick and easy removal of colour, glue, residue, rust and other surface sediment. Efficient result without damaging the surface. Brush ∅ mm Grit Colour max. rpm min-1 7959 Order No. € 115 36 brown 12000 35.90 …0036 115 50 green 12000 35.90 …0050 115 80 yellow 12000 35.90 …0080 115 120 grey 12000 35.90 …0120 ​ (W879) Radial grinding brush Sunburst m Design: Plastic brush with interspersed aluminium oxide abrasive grain. Mould-cast for long life and consistent material removal. No clogging, minimal contact pressure. Application: Especially suited for easy and simple removal of paint, residues, glue, discolouration, rust, thick oxide film and other surface sediments. Note: ROLOC™ backing pad for use on angle grinders with M14 thread, see Order No. 8245, Ç 8/44. Grit Colour max. rpm min-1 7995 7996 Order No. ∅ 51 mm ∅ 76 mm € € 7995 7996 36 brown 25000 20000 7.20 11.35 …0036 50 green 25000 20000 7.20 11.35 …0050 80 yellow 25000 20000 7.20 11.35 …0080 120 grey 25000 20000 7.20 11.35 …0120 ​ (W879) (W879) Radial grinding brush Sunburst, ROLOC™ m Steel C INOX C Cast C Aluminium C Plastic/FRP C Wheel brushes 7

RkJQdWJsaXNoZXIy NTg4MTI=