Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/351 Design: Extractor made of chrome-vanadium-molybdenum steel, jobber drill made of HSS, bronzed. Supplied with the corresponding jobber drill. Application: For removing damaged or broken screws and especially worn inner hexagon screws. Worn hexagon socket screws (1a) are directly removed with the right screwdriver without having to drill (1b/2c). If the screw heads (2a) have broken off, a jobber drill is initially used to pre-drill (2b) and then the screw is removed with the right screw extractor (1b). For this purpose, a ring spanner is placed down onto the screw extractor and the screw can be removed without jamming (1c/2d). Design Set content 1851 Order No. € 16-pc 8 extractors (hexagon) SW 2; 2.5; 3; 4; 5; 6; 8; 10 mm 8 Jobber drills: ∅ 2.3; 2.8; 3.4; 4.5; 5.7; 6.8; 9; 11 mm 96.60 …0050 (W530) Screw extractor set Design: Quick fixation by way of adjustment screw, automatic adjustment of blade to any thread increase. Application: For all metric and non-metric threads (60° flank size). For the finishing of clockwise and anticlockwise threads (observe direction of thread!). for thread ∅ 6941 Order No. € 4–13 mm/5/32–1/2 inch 64.00 …0013 16–38 mm/5/8–1.1/2 inch 235.00 …0038 (W529) Thread finishing tap 6941 0013 6941 0038 Design: Supplied in plastic case. Application: Special profile to release nuts with rounded heads. Design Set content 6942 Order No. € 10-pc 9 spiral nut extractor inserts 1/2", 34 mm long, 10; 11; 12; 13; 14; 15; 16; 17; 19 mm 1 taper drift 135.50 …0010 7-pc 6 spiral nut extractor inserts 1/2", 32 mm long, 21; 22; 24; 27; 30; 32 mm 1 taper drift 136.00 …0020 (W529) Spiral nut extractor insert set 6942 0010 6942 0020 Screw extractors, spiral groove extractors 6
RkJQdWJsaXNoZXIy NTg4MTI=