FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/337 Design: Flywheel extractor made of special steel. With swivelling hooks. The greater the necessary pulling force, the strong the grip of the pulling hocks on the part to be stripped. Particularly strong hooks, which grip through the two or three gaps and grab the belt of the ventilator. With specially coated pressure spindle with especially good smoothing characteristic. Freely rotating centring tip, can be exchanged and unplugged (ball/tip). Application: To pull off flywheels. Model Clamping width mm Clamping depth mm 6892 6893 Order No. € € 201-S 200 200 95.90 – …0200 202-S 200 200 – 123.50 …0200 ​ (W562) (W562) Flywheel extractor 6892 Two-armed. 6893 Three-armed. 6893 6892 Design: Hydraulic extractor made of special steel, robust design, including mechanical spindle. With hydraulic spindle, thus suitable to release particularly stubborn parts. The greater the necessary pulling force, the strong the grip of the pulling hocks on the part to be stripped. Application: Suitable for the stripping of pulleys, gear wheels, ball bearings etc. Model Clamping width mm Clamping depth mm 6894 Order No. € 206-2-B 400 400 557.50 …0400 ​ (W562) Hydraulic extractor, three-armed Design: Bearing extractor with T-handle. With lateral clamp and extractor legs made of chrome alloy tool steel. Has freely rotating centring tip and specially coated pressure spindle with particularly good sliding properties. Application: Suited to extraction of flush ball bearings, bearing rings and similar parts in fine mechanics, electrical workshops, compressed air maintenance etc. Model Clamping width mm Clamping depth mm 6909 Order No. € 204-0 50 70 101.00 …0050 204-02 90 100 156.00 …0090 ​ (W562) Bearing extractor 6909 0050 6909 0090 Design: Pitman arm extractor. With lateral clamp and extractor legs made of chrome alloy tool steel. With specially coated pressure spindle with especially good smoothing characteristic. Freely rotating centring tip, can be exchanged and unplugged (ball/tip). Application: Suited to pull flush pitman arms, ball bearings, gear wheels, pinions and similar parts. Model Clamping width mm Clamping depth mm 6910 Order No. € 204-1 80 90 113.50 …0080 204-2 90 100 130.00 …0100 204-3 150 140 211.50 …0150 ​ (W562) Pitman arm extractor Extractors 6

RkJQdWJsaXNoZXIy NTg4MTI=