All prices quoted are non-binding recommended prices. 6/334 Special characteristics of KUKKO tools Automatic self-tensioning and self-centring of the extractor hooks. Optimised geometry of traverse and sliders for particularly easy movement of the extractor legs. At the same time, ensures a firm grip when tightening the screws. Novel cross hook ensures maximum stability of the suspension in slider and hooks. Changes are easy, because only one screw is necessary. Quick loosening and displacing the extractor legs by means of hand adjusting knurl. Tools with hydraulic function. Its easy to turn back the nut splitter chisel from deformed or demolished nuts. The chisel does not get caught in the nut. Optimal adjustment of the spindle to the shaft by 2-sided spindle tip (ball and tip). Design: Two-armed, with T-handle. With heavy-duty, power-transmission, self-centring slim extractor legs made of chrome alloy tool steel. With automatic adjustment handle, freely rotating centring tip and specially coated pressure spindle with particularly good sliding properties. Handy, space-saving model. Application: Particularly suitable for small electric motors, battery clamps, small ball bearings etc. for motor vehicle electric, electrical workshops, compressed air maintenance and similar applications. Model Clamping width mm Clamping depth mm 6901 Order No. € 43-1 60 50 39.60 …0060 43-2 70 70 40.60 …0070 43-3 80 80 41.70 …0080 (W562) Small part extractor, two-armed Design: Two-armed. With heavy-duty, power-transmission, self-centring extractor legs made of chrome alloy tool steel. Has automatic adjustment handle and specially coated pressure spindle with particularly good sliding properties. Freely rotating centring tip, can be exchanged and unplugged (ball/tip). Powerful model. Application: Especially for pulling very tight-sitting gears, sprockets, ball bearings, belt machines etc. Model Clamping width mm Clamping depth mm 6902 Order No. € 44-1 100 100 46.70 …0100 44-2 120 120 74.30 …0120 44-3 160 160 113.50 …0160 44-4 250 200 157.50 …0250 44-5 300 250 207.50 …0300 (W562) Extractor, two-armed Design: Two-armed. With heavy-duty, self-centring, swivelling extractor legs made of chrome alloy tool steel. Has automatic adjustment handle and specially coated pressure spindle with particularly good sliding properties. Robust universal model 41-0 Particularly sturdy model with hexagon spindle 41-1 Small, handy model with T-handle 41-2 Small, handy model with T-handle 41-3 Strong model, spindle with hexagon mount 41-4 Strong model, spindle with hexagon mount 41-5 Strong model, spindle with hexagon mount Application: Particularly for the stripping of pulleys, gear wheels, ball bearings etc. for stripping in difficult to access locations. Can also be used in conjunction with separating devices. Model Clamping width mm Clamping depth mm 6903 Order No. € 41-0 60 40 28.70 …0060 41-1 65 65 28.70 …0065 41-2 80 80 33.00 …0080 41-3 90 120 64.50 * …0090 41-4 130 160 66.30 * …0130 41-5 180 200 123.50 * …0180 (W562) Extractor, two-armed * Freely rotating centring tip, can be exchanged and unplugged (ball/tip). 6903 0060 6903 0090 Extractors 6
RkJQdWJsaXNoZXIy NTg4MTI=