FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 6/326 Design: Made of special tool steel, round shaft, by 90° bend, conically ends annealed. Application: Ideally suited for the guidance with steel girders and the aligning of drill holes. Length mm Shaft ∅ mm 6839 Order No. € 300 x 100 10 15.60 …0300 350 x 110 12 16.05 …0350 400 x 120 14 17.40 …0400 ​ (W553) Length mm Shaft ∅ mm 6839 Order No. € 450 x 130 16 24.30 …0450 500 x 150 20 31.60 …0500 550 x 170 26 39.40 …0550 ​ (W553) Angle mandrel ​ DIN 6451, Shaft flat oval. Length mm Cutting edge width mm Material thickness mm 6842 Order No. € 125 5 17 x 11 4.43 …0125 150 6 17 x 11 4.81 …0150 175 7 17 x 11 5.30 …0175 ​ (W552) Length mm Cutting edge width mm Material thickness mm 6842 Order No. € 200 8 20 x 12 6.30 …0200 250 9 23 x 13 8.45 …0250 300 9 23 x 13 10.10 …0300 ​ (W552) Cross chisel for metal working DIN 7254 A, shaft flat oval. Length mm Cutting edge width mm Material thickness mm 6848 Order No. € 250 26 20 x 12 6.85 …0250 300 29 23 x 13 8.30 …0300 400 29 23 x 13 10.50 …0400 ​ (W552) Length mm Cutting edge width mm Material thickness mm 6848 Order No. € 500 32 26 x 13 14.20 …0500 600 32 26 x 13 22.20 …0600 ​ (W552) Flat chisel for stone working DIN 7254 B, Shaft octagonal. Length mm Cutting edge width mm Material thickness mm 6844 Order No. € 250 23 16 6.55 …0250 300 26 16 7.55 …0300 ​ (W552) Length mm Cutting edge width mm Material thickness mm 6844 Order No. € 400 28 20 11.50 …0400 500 30 20 14.60 …0500 ​ (W552) Flat chisel for stone working Design: Made of chrome-vanadium air-hardened steel. With tempered striking head, therefore bulge formations, beading and chipping are almost excluded. Blade and shaft hardened, tempered and lacquered. Note: Resharpening without post-curing the cutter is possible repeatedly with simple wet sanding. Chisels DIN 6453, Shaft flat oval. Length mm Cutting edge width mm Material thickness mm 6840 Order No. € 100 15 14 x 9 3.83 …0100 125 18 17 x 11 3.83 …0125 150 18 17 x 11 3.96 …0150 175 21 20 x 12 5.10 …0175 ​ (W552) Length mm Cutting edge width mm Material thickness mm 6840 Order No. € 200 24 23 x 13 6.05 …0200 250 25 23 x 13 7.20 …0250 300 26 23 x 13 8.30 …0300 ​ (W552) Flat chisel for metal working ​ Angle mandrels, chisels 6

RkJQdWJsaXNoZXIy NTg4MTI=