FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/119 ∅ d1 = m7 mm Spiral length l2 mm Shank length l3 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1400 N/mm2 f mm/rev 1200 1203 1206 1209 Order No. € € € € 18.5 79 50 131 20 0.315 214.00 226.00 352.00 C◊ …1850 19 79 50 131 20 0.315 214.00 C◊ 352.00 365.50 …1900 19.5 79 50 131 20 0.315 214.00 226.00 352.00 365.50 …1950 20 79 50 131 20 0.315 214.00 226.00 352.00 365.50 …2000 ​ (W112) (W112) (W112) (W112) Fire Fire Fire Fire Continued Spiral drill, SuperLine, 3 x D Design: With special point geometry. Normal angle of rake, core thickness stronger than normal and without core gradient. The drill has a very good selfcentring behaviour and produces short chips, even from long-chipping materials. Application: Versatile spiral drill for accurate alignment drilling with narrow ∅ tolerances and good surfaces. Suitable for drilling holes up to 5 x D with high cutting values. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 120 110 100 45 15 35 155 125 40 220 180 270 – 45 – – 1212 120 110 100 45 15 35 155 125 40 220 180 270 – 45 – – 1215 130 120 105 60 55 45 160 128 45 260 220 325 – 55 – – 1218 130 120 105 60 55 45 160 128 45 260 220 325 – 55 – – 1221 ∅ d1 = m7 mm Spiral length l2 mm Shank length l3 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1400 N/mm2 f mm/rev 1212 1215 1218 1221 Order No. € € € € 3 28 36 66 6 0.08 44.70 47.30 65.00 66.30 …0300 3.1 28 36 66 6 0.08 44.70 47.30 65.00 66.30 …0310 3.17 28 36 66 6 0.1 44.70 47.30 65.00 C◊ …0317 3.2 28 36 66 6 0.1 44.70 47.30 65.00 66.30 …0320 3.25 28 36 66 6 0.1 44.70 47.30 65.00 C◊ …0325 3.3 28 36 66 6 0.1 44.70 47.30 65.00 66.30 …0330 3.4 28 36 66 6 0.1 44.70 47.30 65.00 66.30 …0340 3.5 28 36 66 6 0.1 44.70 47.30 65.00 66.30 …0350 3.57 28 36 66 6 0.1 C◊ C◊ 65.00 66.30 …0357 3.6 28 36 66 6 0.1 44.70 C◊ 65.00 66.30 …0360 3.7 28 36 66 6 0.1 44.70 47.30 65.00 66.30 …0370 3.8 36 36 74 6 0.1 44.70 47.30 65.00 66.30 …0380 3.9 36 36 74 6 0.1 44.70 47.30 65.00 66.30 …0390 ​ (W112) (W112) (W112) (W112) Fire Fire Fire Fire Spiral drill, SuperLine, 5 x D Continued on next page Solid carbide DIN 6537 RT 100 U 140° 5xD 1221 Fire DIN 6535-HE 1218 Fire DIN 6535-HA 1215 Fire DIN 6535-HE 1212 Fire DIN 6535-HA 3 Solid carbide drills 1.2

RkJQdWJsaXNoZXIy NTg4MTI=