Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/305 Design: 4 standard deburring tools, handy and practical in pocket knife format. Lightweight and spacesaving. All blades can be replaced. Application: For individual deburring on outer and inner surfaces and for drill holes. Set content 6707 Order No. € 1 blade GT-B20 1 blade GT-E100 1 triangular scraper GT-D50 1 crank counterbore GT-BC1040 74.40 …1005 (W554) Combination deburring tool EL-RG 1000 GT Design: With ergonomically shaped softgrip handle EL SG 3000 GT with comfortable finger recessed and blade magazine. Set content 6708 Order No. € 1 Softgrip handle EL SG 3000 GT with blade magazine (6719 0020) 1 HSS-Plus blade B 10 S (6719 0210) 1 HSS-Plus blade E 100 S (6719 0250) 18.30 …0010 (W554) Softgrip deburrer set SG 6708 Softgrip deburrer set SG 1000 Application: Due to the twin mount, all B-blades with a ∅ 2.6 mm and all E-blades with a ∅ 3.2 mm shaft can be used. Note: The Plus-blades are distinguished by a long tool life and suitability for stainless steels. 6709 Softgrip deburring countersinks set SG 1500 Application: Due to the twin mount, all B-blades with a ∅ 2.6 mm and all E-blades with a ∅ 3.2 mm shaft can be used. By connecting with the countersunk head, faster countersinking and chamfering with less fatigue is enabled for drill holes up to ∅ 16.5 mm. Set content 6709 Order No. € 1 Softgrip handle EL SG 3000 GT with blade magazine (6719 0020) 1 HSS crank countersink BC 1650 ∅ 3.2 mm, outer-∅ 16.5 mm (6719 0500) 37.20 …0010 (W554) Set content 6711 Order No. € 1 Softgrip handle EL SG 3000 GT with blade magazine (6719 0020) 1 HSS crank piercing deburrer BO 1000 ∅ 3.2 mm (6719 0300) 24.70 …0010 (W554) 6710 Softgrip chamfering tool set SG 1100 Application: Due to the twin mount, all B-blades with a ∅ 2.6 mm and all E-blades with a ∅ 3.2 mm shaft can be used. Deburring and chamfering of round material up to ∅ 18 mm are enabled by connecting with the deburring bell. 6711 Softgrip piercing deburrer set SG 1200 Application: Due to the twin mount, all B-blades with a ∅ 2.6 mm and all E-blades with a ∅ 3.2 mm shaft can be used. Inner piercings and slots for o-rings as well as securing rings can easily be deburred by connecting with the crank piercing deburrer. Set content 6710 Order No. € 1 Softgrip handle EL SG 3000 GT with blade magazine (6719 0020) 1 HSS crank countersink bell EX 2000 Ø 3.2 mm, outer Ø 4–18 mm (6719 0510) 30.40 …0010 (W554) Deburring tools 6
RkJQdWJsaXNoZXIy NTg4MTI=