FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/291 Design: Form G, knife profile, triangular, with tang, tapering point and hewn on 2 sides. Application: Suitable for processing non-rectangular geometries, deburring as well as filing perforations. Length mm Swiss stroke Cross-section mm 6644 Order No. € 200 2 22 x 5 42.90 …0202 ​ (W549) Tang file, knife Design: Trapezoidal-shape, with tang, point tapered and hewn on 1 side. Application: Suitable for processing non-rectangular geometries as well as filing perforations. Can also be used for precision surface machining. Length mm Swiss stroke Cross-section mm 6645 Order No. € 150 0 16 x 4 26.40 …0150 150 2 16 x 4 28.90 …0152 ​ (W549) Tang file, Barette Design: High quality design in common shape and dimension, each in coarse to fine cut variation. Accurate grade with high filing performance and idle time. Available in lengths 160 mm and 200 mm. Hammer length = half file length, i.e., for total length 160 mm, the hewn length is approx. 80 mm. Shaft/nail diameter 3.25 mm for total length 160 mm and 3.75 mm for total length 200 mm. Application: For the finest and most precise work in machine and tool making. Form Length mm Swiss stroke 6650 Order No. € Flat blunt 160 0 7.45 …0160 Flat blunt 160 1 7.45 …0161 Flat blunt 160 2 7.45 …0162 Flat blunt 160 3 7.85 …0163 Flat blunt 180 00 8.45 …0180 Flat blunt 180 1 8.45 …0181 Flat blunt 180 2 8.45 …0182 Flat blunt 200 0 9.60 …0260 Flat blunt 200 1 9.60 …0261 Flat blunt 200 2 9.60 …0262 Semi-round 160 0 8.55 …1160 ​ ​ (W549) Form Length mm Swiss stroke 6650 Order No. € Semi-round 160 1 8.55 …1161 Semi-round 160 2 8.55 …1162 Semi-round 160 3 8.90 …1163 Semi-round 200 0 11.65 …1200 Semi-round 200 2 11.65 …1202 Triangular 160 0 7.95 …2160 Triangular 160 1 7.95 …2161 Triangular 160 2 7.95 …2162 Triangular 160 3 8.30 …2163 Triangular 200 00 10.70 …2200 Triangular 200 0 10.70 …2201 ​ ​ (W549) Precision needle file CORRADI Continued on next page 6650 0160 – 0262 Form A, flat blunt, rectangular and hewn on 4 sides. 6650 1160 – 1202 Form E, half round and tapering point as well as hewn on 2 sides. 6650 2160 – 2202 Form C, triangular and tapered tip as well as hewn on 3 sides. 6650 3160 – 3202 Form D, square and tapering tip as well as hewn on 4 sides. 6650 4160 – 4202 Form F, round and tapering tip as well as hewn all around. 6650 5161 + 5162 Form A, flat tip, rectangular and tapering as well as hewn on 4 sides. 6650 6160 – 6162 Bird tongue, half round as well as tapering tip and hewn on 2 sides. With two-sided radius. 6650 7160 – 7162 Barette, leg asymmetric, triangular and tapering tip as well as hewn on 1 side. 6650 8160 – 8162 Form G, knife profile, triangular and tapering tip as well as hewn on 2 sides. 6650 8160–6650 8162 6650 7160–6650 7162 6650 6160–6650 6162 6650 5161–6650 5162 6650 4160–6650 4202 6650 3160–6650 3202 6650 2160–6650 2202 6650 1160–6650 1202 6650 0160–6650 0262 Precision files 6

RkJQdWJsaXNoZXIy NTg4MTI=