Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/259 Design: Short design with hexagon drive for working with one hand, including in difficult to access areas. Pilots for thread core holes for perfect, aligned threads. Drive with socket wrench socket and ratchet. Application: For metric ISO precision thread DIN 13. Specially for processing distribution boxes with wall thicknesses of 3 mm to max. 5.5 mm. Thread Gradient mm Total length mm Cutting edge length mm Thread ∅ mm Spanner size mm 1311 Order No. € M12 x 1.5 1.5 51 16.5 10.5 8 15.95 …0012 M16 x 1.5 1.5 51 16.5 14.5 10 26.30 …0016 M20 x 1.5 1.5 51 16.5 18.5 13 36.00 …0020 M25 x 1.5 1.5 51 16.5 23.5 13 48.00 …0025 M32 x 1.5 1.5 51 16.5 30.5 13 79.90 …0032 (W135) Special cutting tap bit for cable screw connections MF HSS ISO 2 6H Design: Supplied in a robust plastic case with foam inlays for safe tool storage. Design Set content 1311 Order No. € 6-pc 5 special cutting tap bits M12 x 1.5; 16 x 1.5; 20 x 1.5; 25 x 1.5; 32 x 1.5 1 subland drill with spiral flute EC 10 for ∅ 7–32.5/M12 x 1.5/M32 x 1.5 284.50 …1000 (W135) Electrical assortment MF HSS ISO 2 6H Design: Chuck slippage is avoided by the 3-surface shaft. With laser print of hole ∅ and speed. Application: For burr-free drilling and reaming of sheets, pipes and profiles as well as for milling long holes and contours. Drill steps ∅ mm Step length mm Total length mm Shaft ∅ mm 1323 Order No. € 4–12 10 80 6 31.90 …0412 (W124) Milling subland drill HSS Design: Short model. Milling blades with chip breakers. Application: Suitable for drilling and milling thin-walled materials such as sheet metal, casting, aluminium, copper, brass, bronze, wood and plastics. ∅ mm Total length mm Shaft ∅ mm 1323 1346 Order No. € € 6 90 6 6.90 13.15 …0060 8 90 8 9.45 19.00 …0080 (W135) (W135) Universal milling drill HSS N 118° 1346 Design: TiN coated. 1346 1323 Cutting tap for cable screw connections The threads are metric ISO precision thread, each with a gradient of 1.5 for all sizes. In distribution cabinets with wall thicknesses up to max. 3-5.5 mm, cable screw connections are screwed into the body. The thread core hole is drilled with one of our subland drills for cable screw connections. Special cutting taps (M12-M32) have been developed for the corresponding thread. The cutting taps have a long pilot tip, which is used to fix the tool in the hole in order to create a 100 % aligned thread, even with single-sided pressure. The tap drive is designed so that it can be operated with a standard hexagon socket wrench socket and a ratchet using just one hand. This type of drive saves time and space. Screwdriver bits 6
RkJQdWJsaXNoZXIy NTg4MTI=