Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 6/239 Design: DIN 3126 E 6.3. Application: To connect bits with the respective operating tools. Universal bit holder 1/4" 641F With circlip. 6409 With strong permanent magnet and circlip. 641D With stainless steel sleeve and strong permanent magnet. 641A With stainless steel sleeve, strong permanent magnet and quick circlip. 641A 1/4" 1/4" 641D 1/4" 1/4" 6409 1/4" 1/4" 641F 1/4" 1/4" Characteristics of bit holders Permanent magnet Holds the screws and makes it easier to set the screws. Circlip The tool is held safely and securely in the bit holder. Particularly robust construction e.g. for assembly lines. Ring magnet Floating, free-range magnetic sleeve holds long, heavy screws. Quick-change chuck The bit can be inserted or removed when the sleeve is pushed forward. The bit is pushed back and held safely and securely. In contrast to the lock, through a circlip the bit change here requires no effort and can easily be accomplished even with oily fingers. Rapidaptor quick-change chuck rapid-in and self-lock: The bit can simply be plugged in without moving the sleeve. Locking is automatic when screw is attached. rapid-out: To remove the bit, sleeve is pushed forward; this lifts the bit which can now be removed easily. rapid-spin: The freewheeling sleeve allows the guide on the bit holder to provide easy attachment and avoid slipping. chuck-all: Allows acceptance of 1/4" bits according to both DIN 3126 C 6.3 and DIN 3126 E 6.3. single-hand: The use of the adapter can be carried out completely with just one hand. Bit holder Inch Machine mount Inch Length mm 641F 6409 641D 641A Order No. € € € € 641F 6409/641D/641A 1/4 1/4 57 50 10.60 4.35 4.58 6.85 …0005 1/4 1/4 – 75 – 6.35 – 9.60 …0010 1/4 1/4 – 100 – – – 13.25 …0012 1/4 1/4 – 152 – – – 14.65 …0015 1/4 1/4 – 300 – – – 17.85 …0020 (W545) (W546) (W545) (W545) Universal holders 6
RkJQdWJsaXNoZXIy NTg4MTI=