FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/90 Design: With QuickIN shank, inner drill hole 6.35 mm. Application: For use in magnetic base drills and column drills with QuickIN holding fixture. The core drill only machines a thin material ring. The remaining drill core is ejected by a guide and ejector pin using spring force. The chips are quickly moved up for disposal and the risk of breakage is minimised. Even large drilling diameters require relatively low amounts of energy. The core drill machines only a small part of the overall area in comparison to the jobber drill. This results in huge savings in power and time. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C C U U C U C C U – – U – – – – 1054 C C U U C U C C U – – U – – – – 1057 Drill bit -∅ mm 1054 1057 Order No. € € 12 49.30 – …1235 13 49.30 – …1335 14 49.30 – …1435 15 49.30 – …1535 16 49.30 – …1635 ​ (W149) (W149) Drill bit -∅ mm 1054 1057 Order No. € € 17 49.30 – …1735 18 49.30 – …1835 19 49.30 – …1935 20 49.30 – …2035 21 49.30 – …2135 ​ (W149) (W149) Drill bit -∅ mm 1054 1057 Order No. € € 22 49.30 – …2235 23 49.30 – …2335 24 49.30 – …2435 25 49.30 – …2535 26 49.30 – …2635 ​ (W149) (W149) bright bright bright bright bright bright Core drill Carbide 1054 bright 35 mm cutting depth. Carbide Ultra core drill with Fine Quick IN holding fixture. 1057 bright 50 mm cutting depth. Carbide Ultra core drill with Fine Quick IN MAX / Weldon 32 holding fixture. 1057 bright 1054 bright Design mm 1125 1049 1141 Order No. € € € extra long, 2-pc. 9.35 – – …6031 Ejector pin Ø 6.35 x 75 – 6.50 – …0001 Ejector pin Ø 6.35 x 100 – 8.30 – …0003 Weldon/MT 2 with manual inner lubrication* – 48.70 – …0219 Weldon/MT 3 with manual inner lubrication* – 55.20 – …0319 Weldon/MT 4 with manual inner lubrication* – 71.80 – …0419 Weldon/MT 2 with automatic internal lubrication* – 90.20 – …1219 Weldon/MT 3 with automatic internal lubrication* – 96.00 – …1319 Weldon/MT 4 with automatic internal lubrication* – 114.50 – …1419 For fine core drills with QUICK-IN shank including 1 ejector pin – – 52.60 …0001 Extension 80 mm, 19 mm weldon shank ( 3/4“), including 1 ejector pin – – 93.10 …0003 With QuickIN holding fixture for core drills with weldon shank 19 mm ( 3/4) including 1 ejector pin each – – 53.80 …0005 (W147) (W148,W147) (W147) Accessories for core drill * Matching mounts/adapters are available on request. 1125 Ejector pin for core drill. To suit core drill Order No. 1125. 1049 0001 + 0003 Ejector pin for core drill. To suit core drill Order No. 1012, 1043, 1044, 1049. 1049 0219 – 0419 Tool holder for core drills with Weldon shank. With manual inner cooling. To suit all machines with drilling spindle MT 2/MT 3 or MT 4. 1049 1219 – 1419 Tool holder for core drills with Weldon shank. With automatic inner cooling. To suit all machines with drilling spindle MT 2/MT 3 or MT 4. 1141 Adapter for core drill. Order No. 1141 0001 Order No. 1049 1219 -1419 Order No. 1049 0219 -0419 Continued on next page Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=