FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/88 Design: With 19 mm weldon shank (3/4“), inner drill hole 6.35 mm. Application: For use in magnetic base drills and column drills with MT mount. The core drill only machines a thin material ring. The remaining drill core is ejected by a guide and ejector pin using spring force. The chips are quickly moved up for disposal and the risk of breakage is minimised. Even large drilling diameters require relatively low amounts of energy. The core drill machines only a small part of the overall area in comparison to the jobber drill. This results in huge savings in power and time. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 – – – – – 20 20 – 25 20 – – – – – 1012 25 15 – – – – 25 25 – 25 20 – – – – – 1043 25 15 – – – – 25 25 – 25 20 – – – – – 1044 30 20 15 17 17 – 25 25 – 30 25 – – – – – 1049 25 20 – 20 20 – – – – – – – – – – – 1125 Drill bit -∅ mm 1012 1043 1044 1049 1125 Order No. Vario PLUS Vario PLUS Vario PLUS € € € € € 12 19.15 25.40 28.20 – – …1230 13 20.30 26.60 30.40 – – …1330 14 18.10 24.30 31.90 35.50 – …1430 15 21.40 28.50 36.80 36.40 – …1530 16 21.60 29.20 40.30 36.50 – …1630 17 22.40 30.40 41.30 36.50 – …1730 18 21.50 28.30 39.90 36.70 – …1830 19 23.80 32.00 46.60 36.80 – …1930 20 25.00 33.90 49.30 36.80 70.50 …2030 21 26.60 35.90 50.50 37.30 70.50 …2130 22 26.10 35.40 50.40 37.30 70.50 …2230 23 28.60 38.50 54.20 37.30 70.50 …2330 24 29.60 39.70 56.40 37.60 70.50 …2430 25 30.90 42.50 59.10 37.70 70.50 …2530 26 30.10 41.60 59.20 38.90 77.10 …2630 27 32.70 45.00 64.30 38.90 77.10 …2730 28 33.90 46.30 66.20 39.00 77.10 …2830 29 34.90 47.50 68.10 39.20 77.10 …2930 30 35.70 50.90 72.00 39.40 77.10 …3030 31 36.90 52.50 74.80 46.00 93.90 …3130 32 37.80 53.60 76.10 46.80 93.90 …3230 33 40.00 56.10 77.60 48.50 94.00 …3330 34 47.00 65.00 79.30 48.60 94.00 …3430 35 51.70 72.00 83.70 49.30 94.00 …3530 ​ (W147) (W147) (W147) (W148) (W148) bright bright Core drill Continued on next page 1012 bright 30 mm cutting depth 1043 30 mm cutting depth, Vario PLUS-coated 1044 55 mm cutting depth, Vario PLUS-coated 1049 30 mm cutting depth, Vario PLUS-coated 1125 bright 110 mm cutting depth 1125 bright Carbide 1049 Carbide 1044 HSS 1043 HSS 1012 bright HSS Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=